FANUC GE Fanuc CNC Parts, Service, Repair. Operators Manual for Mills. Alarm List and Description, ENP 16T/18T 16M/18M Parameter Manual. fanuc 18T. Hi I am a nebie to this form and I have hit a problem with the Okuma Howa 2sp 35 HG I have zeroed the work shift offset. fanuc 18t home position. my first post so be gentle!!! anyways we seem to have lost our home postion and the machine now considers its home.
|Published (Last):||28 June 2004|
|PDF File Size:||12.11 Mb|
|ePub File Size:||13.49 Mb|
|Price:||Free* [*Free Regsitration Required]|
The fact the error is a perfectly round number tells me it was an operator MDI input error or a programming error, nothing to so with the hardware or software of the machine.
Fanuc 16T 16M 18T 18M Troubleshooting Procedures Alarm List
From your first pic hit the “ALL” soft key and let us have a look at a pic of that. Never seen a lathe doo that Ultimately, we are trying to set the work coordinate systems in the programs using G10s, which will work right now. Does anyone know if there is a parameter that changes the mode fanhc the measure key from incremental to absolute?
What is parameter set to? Something fankc, regardless I would turn my rapids waaaay down, next time you cycle the machine.
Results 1 to 6 of 6.
I know this post is super old so hopefully someone sees this. Move the machine to where you want home to be Turn Parameter Write Enable on in the Offset screen Go to Parameters in the System screen, go down to the Z axis row of parameter The issue is, when using the Measure soft key to set the 0 position of a work offset say G54the offset is adding incrementally.
If you were to fnauc G0X0Z0 this will be the position of parameter from your reference position. Thanks in advance for any help!!! Here is pic off geometry offset page, all zeroes. Results 1 to 5 of 5.
Originally Posted by Ox. Possible guy keyed G50 how to check?
DNC and CNC setting for Fanuc 18T
I don’t quite understand your expectations that this spot should be ZERO. Never thought it would be this hard. Fanuf a Ballard VTL with a fanuc t.
Move the afnuc towards -VE directionthan refrence the axis The problem is solved. Tags for this Thread axisbackbobfanuchome. First thing that I would consider would be to use GG59 instead of G Those are the ones to check.
Now if that does not correct it then I would suspect that you have a value in that is shifting you off.
G90 is typically default on the Fanuc controls once reset is pushed but if you were measuring midstream thru a program then it may get mugged up. Geometry and wear offsets only are active when called in the program. Apparently the turret is at a place that you have determined should be Z0? Fanux had a guy come in to program and run a part. Setting this can be a bit of a brain twister if you have not done it before because you also have to adjust your softlimit settings.
Was it working and now not?
Fanuc 18T Manuals
Fanuc 18T Help Somehow the Z axis home position got reset to 1.