View and Download HP Compaq dx hardware manual online. HP Compaq dx Hardware Guide. Compaq dx Desktop pdf manual download. Hp Compaq dx Pdf User Manuals. View online or download Hp Compaq dx Troubleshooting Manual. Hp NVUT – Compaq dx Microtower PC Pdf User Manuals. View online or download Hp NVUT – Compaq dx Microtower PC Support List, Quick .
|Published (Last):||3 November 2009|
|PDF File Size:||2.46 Mb|
|ePub File Size:||16.20 Mb|
|Price:||Free* [*Free Regsitration Required]|
No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company. About This Book This guide provides basic information for manyal this computer model. Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life.
Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. For a complete listing of the hardware and software installed in the computer, run the diagnostic utility included on some computer models only.
Instructions for using the utility are provided in the Troubleshooting Guide. Front Panel Components Drive configuration may vary by model. Media Card Reader Components The media card reader is an optional device available on some models only.
Refer to the following illustration and table to identify the media card reader components. Editing Keys Includes the following: Using the Windows Logo Key Use the Windows Logo key in combination with other keys to perform certain functions available in the Windows operating system.
Refer to the Keyboard on page 5 section to identify the Windows Logo key. Serial Number Location Each computer has a unique serial number and product ID number that are located on the top cover of the computer. Keep these numbers available for use when contacting customer service for assistance. Hardware Upgrades Warnings and Cautions Before performing upgrades be sure to carefully read all of the applicable instructions, cautions, and warnings in this guide.
To reduce the risk of personal injury from electrical shock, hot surfaces, or fire: Disconnect the power cord from the wall outlet and allow the internal system components to cool before touching. Remove all removable media, such as diskettes or compact discs, from the computer. Turn off the computer properly through the operating system, then turn off any external devices.
Disconnect the power cord from the power dx240 and disconnect any external devices. Replacing the Computer Access Panel Place the access panel on the chassis with about 1. Ensure that the hole for the screw is aligned with the hole in the chassis and tighten the screw 2.
Populating dimm sockets – HP DX2400 User Manual
Removing Bezel Blanks On some models, there are bezel blanks covering the 3. To remove a bezel blank: Remove the front bezel. Press the two retaining tabs towards the outer left edge of the bezel 1 and pull the bezel blank inwards to remove it 2. Replacing the Front Bezel Insert the three hooks on the left side of the bezel into the slots on the chassis 1 and rotate the bezel on from left to right 2 so that it snaps in place.
These memory sockets are populated with at least one preinstalled DIMM. For optimal speed, the channels should be balanced so that the largest amount of memory is spread between the two channels.
If one channel will have more memory than the other, the larger amount should be assigned to Channel A. Open both latches of the memory module socket 1and insert the memory module into the socket 2. A memory module can be installed in only one way. Match the notch on the module with the tab on the memory socket. Removing or Installing an Expansion Card The computer has one standard PCI expansion slot that can accommodate an expansion card up to Remove the computer access panel.
Locate the correct vacant expansion socket on the system board and the corresponding expansion slot on the back of the computer chassis. On the rear of the computer, a slot cover lock secures the expansion card brackets in place.
Remove the screw from the slot cover lock then slide the slot cover lock up to remove it from the chassis. Before removing an installed expansion card, disconnect any cables that may be attached to the expansion card.
If you are installing an expansion card in a vacant socket, you must use a flatblade screwdriver to pry out the metal shield on the rear panel that covers the expansion slot. Be sure to remove the appropriate shield for the expansion card you are installing.
If you are removing a PCI Express x16 card, pull the retention arm on the back of the expansion socket away from the card and carefully rock the card back and forth until the connectors pull free from the socket. Be sure not to scrape the card against the other components. To install a new expansion card, hold the card just above the expansion socket on the system board then move the card toward the rear of the chassis so that the bottom of the bracket on the card slides into the small slot on the chassis.
HP Compaq dx2400 Manuals
Press the card straight down into the expansion socket on the system board. Reconnect the power cord and any external devices, then turn on the computer.
Lock any security devices that were disengaged when the access panel was removed. Reconfigure the computer, if necessary. Installing Additional Drives When installing additional drives, follow these guidelines: To prevent loss of work and damage to the computer or drive: If you are inserting or removing a drive, shut down the operating system properly, turn off the computer, and unplug the power cord.
Do not remove a drive while the computer is on or in standby mode. Before handling a drive, ensure that you are discharged of static electricity. System Board Drive Connections Refer to the following illustration and table to identify the system board drive connectors. All removable media should be taken out of a drive before removing the drive from the computer. To remove an optical drive: Remove the screw that secures the drive to the drive cage 1then slide the drive out of the front of the chassis 2.
Installing an Optical Drive into the 5. Connect the power cable 1 and data cable 2 to the rear of the optical drive. Disconnect the drive cables, as indicated in the following illustrations: If you are removing a diskette drive, disconnect the data cable 1 and power cable 2 from the back of the drive.
Remove the retainer screw that secures the drive to the bay 1 then slide the drive forward and out of the bay 2. Figure Removing a 3. Slide the drive in through the front of the chassis 1 until the bezel on the drive is evenly aligned with the computer front bezel and install the M3 metric retainer screw 2 as shown in the illustration below.
Extra drive retainer screws are provided on the interior of the front bezel if needed. Removing an Internal 3. Before you remove the old hard drive, be sure to back up the data from the old hard drive so that you can transfer the data to the new hard drive. Also, if you are replacing the primary hard drive, make sure you have created a Recovery Disc Set to restore the operating system, software drivers, and any software applications that were preinstalled on the computer.
Push down the latch on the side of the hard disk drive cage 1then slide the hard disk drive cage away from the bottom of the chassis 2 as shown below. Disconnect the power cable 1 and data cable 2 from the back of the hard drive. Figure Disconnecting the Hard Drive Cables Remove the four screws that secure the hard disk drive to the hard disk drive cage 1then slide the hard disk drive out of the hard disk drive cage 2. Installing an Internal 3. Slide the new drive into the hard disk drive cage 1aligning the drive with the four screw holes on the cage.
Connect the power cable 1 and data cable 2 to the back of the hard drive.
Never crease or bend a SATA data mamual tighter than a 30 mm 1. A sharp bend can break the internal wires. Attach the two screws that secure the hard disk drive cage to the chassis. Figure Securing the Hard Drive Cage If installing a new drive, connect the opposite end of the data cable to the appropriate system board connector.
If your system has only one SATA hard drive, you must connect the hard drive data cable to the dark blue connector labeled SATA0 to avoid any hard drive performance problems. The power factor correction is present in the V operating mode only.
This allows the system to pass the CE mark requirements for use in the countries of the European Union. This supply requires the use of an input voltage range select switch. Battery Replacement The battery that comes with the computer provides power to the real-time clock.
HP COMPAQ DX HARDWARE MANUAL Pdf Download.
When replacing the battery, use a battery equivalent to the battery originally installed in the manula. The computer comes with a 3-volt lithium coin cell battery.
The computer contains an internal lithium manganese dioxide battery. On some computer models, it may be necessary to remove an internal component to gain access to the battery. Depending on the type of battery holder on the system board, complete the following instructions to replace the battery.
Removing an optical drive | HP DX User Manual | Page 33 / 59
Type 1 Lift the battery out of its holder. Insert the new battery and position the clip back into place. After the battery has been replaced, use the following steps to complete this procedure. Replace the computer access panel.
Plug in the computer and turn on power to the computer. Installing a Security Lock The security locks displayed below and on mamual following pages can be used to secure the computer. Thread the keyboard and mouse cables through the lock. Insert the plug end of the security cable into the lock 1 and push the button in 2 to engage the lock. Use the key provided to disengage the lock.
Electrostatic Discharge A discharge of static mabual from a finger or fx2400 conductor may damage system boards or other static-sensitive devices. This type of damage may reduce the life expectancy of the device.